JasonZavoda wrote:
** expired/removed eBay auction **


Invincible Overlord, Only a few hours left.

Assuming the picture has been coloured and 'glossy' simply means clean, did anyone ask the Seller whether this was a 1st or 2nd print? Is the winner a member here?

HermitFromPluto wrote:
Assuming the picture has been coloured and 'glossy' simply means clean, did anyone ask the Seller whether this was a 1st or 2nd print? Is the winner a member here?

It looks like a 1st since it has a darker bottom left hand picture along with the center Flying Pegasus, but I can't confirm that..yet.

ShaneG.

Did anyone else from the Acaeum bid on that Overlord?

serleran wrote:Inferno

Dark Tower

Caverns of Thracia

Guess I should've posted the Inferno and Dark Tower in here as well...I put them up in the Classifieds section but not here. As always with my auctions, if someone from here wins, let me know and I'll knock 10% off the final auction price as an Acaeum discount.

And don't forget the August 1978 Fantasy Catalog --> cgi.ebay.com/ws/eBayISAPI.dll?ViewItem& ... 0262062483  which is actually in better condition than the pictures show.  I'll probably add additional pictures of it. Gotta love my 10 year old 2.3 megapixel digicam.

JasonZavoda wrote:
Caverns of Thracia and Dark Tower are excellent, but I'm not familiar with Inferno. How does it play?

Probably the most fun I had with a Judges Guild supplement was Frontier Forts of Kelnor. I built of model of the fort and used it over and over again for adventures (it was constantly being besieged). It was surprisingly easy to build from the drawing (being a simple design) and made a wonderful little outpost.

What materials did you use to build that fort?
Do you still have it?
If so can you post a few pics?

I have been thinking of building some things myself, hence my questions above.

Interesting that you mentioned using that specific book for your plans, as I can see a lot of possiblities in the Frontier Forts of Kelnore.
I have been reading it myself for some time now with a similar project in mind.

My wife is an arts and crafts type of person and she thinks that the soft wood you can get at many craft shops would be simple and easy to use.
I do not think the wood she was pointing out was pine, but some even softer wood.
But, although I could not dissagree with her about the ease of using such soft woods, I am wondering about the durability of the finished product when using softer wood.
Some of my minis are the old type, heavy............ and I will be having small kids using the stuff too (Grandkids)

So, did you build the buildings and the tower with access to the insides as you hinted at above?
Did you build any of the basement or dungeon levels shown in that book?
The main building shows two levels and the tower has (it looks like) 4 levels.
With the removable side and top sections did you have access to (And did you build) all four levels for the tower?
And both floors of the main building?

Sorry if all the questions seem silly.

I do want to build something myself, and I am waffling on what to do first and how to do it.

My first thought was to start small with short wall sections (4-6 inches long and 2 inches high each) and small floor pieces (2 inches square each, more or less).
With such smaller pieces I could create any length or width of hallways, and any shape or size of rooms.
And such smaller peices could easily be revised to fit most adventure scenarios.
At least for interior building, and some underground (Dungeon) areas anyway.

But, Later on after I feel more comfortable about it all, I may be building a fort, or castle, or keep.

I simply cannot afford to buy the Dungeon Forge stuff (Though I think they are awesome).

Aneoth wrote:I have been thinking of building some things myself, hence my questions above.

Interesting that you mentioned using that specific book for your plans, as I can see a lot of possiblities in the Frontier Forts of Kelnore.
I have been reading it myself for some time now with a similar project in mind.

My wife is an arts and crafts type of person and she thinks that the soft wood you can get at many craft shops would be simple and easy to use.
I do not think the wood she was pointing out was pine, but some even softer wood.
But, although I could not dissagree with her about the ease of using such soft woods, I am wondering about the durability of the finished product when using softer wood.
Some of my minis are the old type, heavy............ and I will be having small kids using the stuff too (Grandkids)

So, did you build the buildings and the tower with access to the insides as you hinted at above?
Did you build any of the basement or dungeon levels shown in that book?
The main building shows two levels and the tower has (it looks like) 4 levels.
With the removable side and top sections did you have access to (And did you build) all four levels for the tower?
And both floors of the main building?

Sorry if all the questions seem silly.

I do want to build something myself, and I am waffling on what to do first and how to do it.

My first thought was to start small with short wall sections (4-6 inches long and 2 inches high each) and small floor pieces (2 inches square each, more or less).
With such smaller pieces I could create any length or width of hallways, and any shape or size of rooms.
And such smaller peices could easily be revised to fit most adventure scenarios.
At least for interior building, and some underground (Dungeon) areas anyway.

But, Later on after I feel more comfortable about it all, I may be building a fort, or castle, or keep.

I simply cannot afford to buy the Dungeon Forge stuff (Though I think they are awesome).

Frontier Forts is a greater starter project.

Soft woods: They are easy to build with and they are light. The downside is that they damage easily and can splt the length of the piece. at least with the pine I was using. Today they probably aren't cheap either.

Build the rooms first. The walls are easy and you won't box yourself. Instead if you do the walls last you can build them to fit the buildings. Always test with miniatures first for sizing.

I built the tower in sections. One fiting onto another so that they would stack and so I could lift them off. The side piece I kept as a single piece of wood that I could take away to access the interiors while they were stacked together. The buildings just had removable roofs and I didn't build the cellars or dungeons.

Today I would probably pick up Mage Knight wall sections which should be dirt cheap (The giants I picked up were a buck apiece, brand new in the case). They are decent and can be glued together and touched up.

I like working with wood, but some of the resin and foam stuff isn't bad. More arts and crafts than I have the skill for. The Giant Hall I'm building though is all wood for walls and roofs.

Now if you can get a modular design going it will help you. It will get things going orderly and it is the way to make big projects practical. There are a couple of places that sell molds for model building that are modular. If you are interested I can track them down and post the links.

jasonw1239 wrote:Have you looked at the Hirst Arts stuff? Their silicone mold sets seem to be quite reasonable and the only other material required is plaster-of-paris and paint.

Hirst Arts Mold Page

Thanks but yes, I have visited that site on many occasions over the past year or so.
At $34 bucks per mould I think they are not so reasonable.
To get all the moulds needed for what I want to do, It would be cheaper and far less work to buy the Dwarven Forge stuff.
What is worse, is that when I first found that site, the same moulds were only 12 bucks each....  

I have had nothing but trouble from the few Hirst Moulds I have.
All of the ones I have are too thin to be easy to use.
I got those in a box set that was really old (like 80's).
The plaster almost always cracks up when I take the pieces out of the moulds.

I admit to being a newbie with them and plaster, but I have tried different mixtures and read and followed the Hirst instructions on their web site.
I am still having a lot of problems with them.

Some of the ones they have now are thicker I think.
If so, I am sure they would solve many of the problems I am having now.
But the windows and door moulds they have listed are still the same moulds I have and are still too thin.